Aftermarket Festo DFM-16-20-P-A-GF 170833 Guided Drive Cylinder for Automation Systems and Industrial Equipment

Aftermarket Festo DFM-16-20-P-A-GF 170833 Guided Drive Cylinder for Automation Systems and Industrial Equipment

Replacement Part Number: DFM-16-20-P-A-GF, DFM1620PAGF, 170833

Specification:
Distance from centre of gravity of load to yoke plate (xs): 50 mm
Stroke: 20 mm
Piston diameter: 16 mm
Operating mode, drive unit: Yoke
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: Optional
Guide: Plain-bearing guide
Design: Guidance
Position detection: Via proximity switch
Operating pressure: 0.2 MPa...1 MPa / 2 bar...10 bar
Max. speed: 0.8 m/s
Mode of operation: Double-acting
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class (CRC): 1 - Low corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Cleanroom class: Class 7 according to ISO 14644-1
Ambient temperature: -20 °C...80 °C
Impact energy in end positions: 0.15 Nm
Max. force Fy: 304 N
Max. force Fy static: 304 N
Max. force Fz: 304 N
Max. force Fz static: 304 N
Max. moment Mx: 6.99 Nm
Max. torque Mx static: 6.99 Nm
Max. moment My: 2.89 Nm
Max. torque My static: 2.89 Nm
Max. moment Mz: 2.89 Nm
Max. torque Mz static: 2.89 Nm
Max. permissible torque load Mx as a function of stroke: 1.17 Nm
Max. effective load dependent upon stroke at defined distance xs: 27 N
Theoretical force at 0.6 MPa (return stroke): 90 N
Theoretical force at 0.6 MPa (advance stroke): 121 N
Moving mass: 242 g
Product weight: 507 g
Alternative connections: See product drawing
Pneumatic connection: M5

Applications:
Fit for Automation Systems Industrial Equipment and so on machines with Festo Guided Drive Cylinder DFM-16-20-P-A-GF.