Aftermarket Festo DSNU-20-25-P-A 19208 Pneumatic Cylinder for Automation Systems and Industrial Equipment

Aftermarket Festo DSNU-20-25-P-A 19208 Pneumatic Cylinder for Automation Systems and Industrial Equipment

Replacement Part Number: DSNU-20-25-P-A, DSNU2025PA, 19208

Specification:
Stroke: 25 mm
Piston diameter: 20 mm
Piston rod thread: M8
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: Optional
Conforms to standard: CETOP RP 52 P, ISO 6432
Piston-rod end: Male thread
Design: Piston, Piston rod, Cylinder barrel
Position detection: Via proximity switch
Variants: Piston rod at one end
Operating pressure: 0.1 MPa...1 MPa / 1 bar...10 bar
Mode of operation: Double-acting
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Cleanroom class: Class 6 according to ISO 14644-1
Ambient temperature: -20 °C...80 °C
Impact energy in end positions: 0.2 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke: 158.3 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 188.5 N
Moving mass for 0 mm stroke: 44 g
Additional moving mass per 10 mm stroke: 4 g
Basic weight for 0 mm stroke: 186.8 g
Additional weight per 10 mm stroke: 7.2 g
Type of mounting: With accessories
Pneumatic connection: G1/8

Applications:
Fit for Automation Systems Industrial Equipment and so on machines with Festo Pneumatic Cylinder DSNU-20-25-P-A.