Aftermarket Festo ESNU-10-10-P-A 19257 Standard Cylinder for Automation Systems and Industrial Equipment

Aftermarket Festo ESNU-10-10-P-A 19257 Standard Cylinder for Automation Systems and Industrial Equipment

Replacement Part Number: ESNU-10-10-P-A, ESNU1010PA, 19257

Specification:
Stroke: 10 mm
Piston diameter: 10 mm
Piston rod thread: M4
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: Optional
Conforms to standard: CETOP RP 52 P, ISO 6432
Piston-rod end: Male thread
Design: Piston, Piston rod, Cylinder barrel
Position detection: Via proximity switch
Symbol: 00991729
Variants: Piston rod at one end
Operating pressure: 0.15 MPa ... 1 MPa / 1.5 bar ... 10 bar
Mode of operation: Pushing, Single-acting
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Ambient temperature: -20 °C ... 80 °C
Impact energy in end positions: 0.05 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 41.6 N
Moving mass for 0 mm stroke: 8.5 g
Additional moving mass per 10 mm stroke: 1 g
Basic weight for 0 mm stroke: 37.3 g
Additional weight per 10 mm stroke: 2.7 g
Type of mounting: With accessories
Pneumatic connection: M5

Applications:
Fit for Automation Systems Industrial Equipment and so on machines with Festo Standard Cylinder ESNU-10-10-P-A.