Aftermarket Festo ESNU-16-50-P-A 19265 Standard Cylinder for Automation Systems and Industrial Equipment

Aftermarket Festo ESNU-16-50-P-A 19265 Standard Cylinder for Automation Systems and Industrial Equipment

Replacement Part Number: ESNU-16-50-P-A, ESNU1650PA, 19265

Specification:
Stroke: 50 mm
Piston diameter: 16 mm
Piston rod thread: M6
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: Optional
Conforms to standard: CETOP RP 52 P, ISO 6432
Piston-rod end: Male thread
Design: Piston, Piston rod, Cylinder barrel
Position detection: Via proximity switch
Variants: Piston rod at one end
Operating pressure: 0.12 MPa...1 MPa / 1.2 bar...10 bar
Mode of operation: Pushing, Single-acting
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Ambient temperature: -20 °C...80 °C
Impact energy in end positions: 0.15 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 106.5 N
Moving mass for 0 mm stroke: 23 g
Additional moving mass per 10 mm stroke: 2 g
Basic weight for 0 mm stroke: 89.9 g
Additional weight per 10 mm stroke: 4.6 g
Type of mounting: With accessories
Pneumatic connection: M5

Applications:
Fit for Automation Systems Industrial Equipment and so on machines with Festo Standard Cylinder ESNU-16-50-P-A.